Posts Tagged ‘flooring’

This is a product review video on Premier Flooring Solutions – Canyon Creek Collection. Enjoy!

Combine economical heating with the beauty of hardwood flooring simply by installing hardwood floors over radiant heating. As a long-term economical investment, installing hardwood floors over radiant heating will enhance the value and aesthetics of your home and provide a warm, cozy and comfortable environment during cold winter months. Radiant heating is also a good choice for allergy sufferers who wish to avoid the dust blown about by forced air heating systems.

How does radiant heating work?

Radiant heating does not heat air directly, unlike conventional forced air heating systems, where warm air rises and much is lost, making them less energy efficient. Rather, radiant heating works by transferring heat directly to objects: when placed beneath wood flooring it heats the floor, and since less heat is lost through the air, radiant heating is more energy efficient than forced air heating systems.

Electric radiant heating systems are often used to heat small rooms like bathrooms and kitchens. They use thin electric mats that work much like electric blankets. A hydronic radiant heating system is usually used for larger rooms, involving tubing that is within a concrete slab, or under plywood sub floors. Heated water is pumped through the tubing network, where it releases its heat energy into the floor.

Here are some commonly asked questions and answers about installing hardwood floors over radiant heating:

* Which wood is best for radiant-heat flooring?

In general, it is best to choose a wood species known for stability: American hardwoods such as cherry, oak, ash, maple, hickory and walnut are good choices. Because of its dimensional stability, engineered flooring is recommended.

* Can the heat harm the wood?

While the heater’s temperature will not harm the wood, it will affect its moisture content. With the heat source being directly beneath the flooring, it can dry out or gain moisture far faster than flooring in a home with a conventional heating system. Therefore it is important that the surface temperature of the wood floor does not exceed 85 degrees, and that the temperature variations are smooth and gentle. These are easily achieved with the following climate controls:

• exterior thermostat – protects the perimeter of the system from condensation absorption during rapid temperature changes.
• mechanical humidity control – this ensures that the moisture content of the floor will remain stable by keeping the relative humidity at an even level.
• heat transfer point control – prevents overheating by monitoring the floor temperature.

* Is there a recommended board width?

It is best to use narrow boards, no wider than 3 inches. As narrow boards expand and contract less than wide boards do, they will better accommodate the wood’s expansion and contraction across a floor. The larger number of seams in a floor also helps in absorbing movement. If you must use planks wider than 3 inches, consider using quarter-sawn wood for enhanced dimensional stability. The wider the board, the greater the potential for gaps between the boards when they contract with seasonal changes in temperature and humidity.

* Does the wood need to acclimate to the site?

The hardwood must be stored in the house for 7 to 10 days before installation so it can acclimate, and the radiant heating system should ideally be turned on for several weeks before the hardwood flooring is installed.

*How should the sub floor be prepared for hardwood?

The most important factor in successfully installing hardwood floors over radiant heating is a dry sub floor. A flooring professional can check the moisture content of your sub floor to determine whether it is acceptable for a hardwood flooring installation. If acceptable moisture content isn’t maintained, moisture left in the sub floor will enter the wood flooring as soon as the heat is turned on. This will result in the floor excessively expanding, contracting, cracking and warping. The only sure way to do avoid this is to turn on the radiant heating system before installing the wood flooring. A high quality vapor retardant should also be installed over the sub floor to help protect your hardwood floor from moisture.

* What if there is excessive moisture?

You can tape a 4×4 foot section of polyethylene plastic sheeting to the slab and turn on the heat to check for the presence of excessive moisture in the slab. If moisture appears under the plastic, heat the slab for another 24 hours. Keep repeating the test until no moisture is visible.

For additional consultation on installing hardwood flooring over radiant heat, please call Tamalpais Hardwood Floors at (866) 987-8686 and ask for Dermot.

Hard Wood Floors
Archives
Pages
Categories